Wet Cleaning Module

  • Designed to run continuously in production line
  • Water jets spray outside and inside of the conveyor chain
  • Completely mechanical, does not require electrical components, programming or secondary motor
Contact Us
Conveyor specialists are ready to help you find the right solution

Benefits of the Wet Cleaning Module:

  • Wet Cleaning Module provides continuous cleaning of conveyor chain for applications with liquid or product overfill or package breakage
  • Water jets spray outside and inside of the conveyor chain
  • Series Driven Brush scrubs top and bottom surface of chain
  • Air knifes blow off water from chain
  • Vacuum draws away excess water
  • Designed to run continuously in production line
  • Allows for longer, cleaner production runs with less overall maintenance
  • Clean design with minimal area for dirt and debris to accumulate
  • Fully encased components with cover designed for worker safety
  • Completely mechanical, does not require electrical components, programming or secondary motor

Features & Specifications

  • Available on FlexMove Stainless Steel Conveyors SS (65 mm) and SM (85 mm)
  • Size Requirement: 700 mm (L) x 700 mm (H)
  • Minimum top of chain height: 750 mm (29.5 in)
  • Maximum conveyor length: 4.5 m (14.8 ft)
  • Maximum conveyor speed: 50 m/min (164 ft/min)

Operating Requirements:

Air Supply

  • Connection: 8 mm tubing
  • Air pressure required: 0.69 MPa (100 PSI)

Water Supply

  • Connection 3/8 in NPT
  • Normal operating pressure 0.98MPa. (140 psi)
  • Flow rate required: ~13 litre/min (0.5 CFM)

Drying Vacuum

  • Vacuum attachment: OD Ø38 mm, ID Ø34 mm pipe.
  • Vacuum airflow required: ~56 litre/s (120 CFM), typical commercial grade wet/dry vacuum is acceptable

Chain Cleaning Flow Diagram

Dimensions

Manuals & Literature

Looking for Service Manuals? Search for Service Manuals by part number or product type HERE.

Literature
FlexMove Wet Cleaning Module